Thanks to its structured surface, our optimised deck is particularly non-slip, hard-wearing and low maintenance. You neither have to paint nor oil. In an innovative production process this core is covered with a layer of polymere that protects it all over. This protective cover makes the surface water repellant and guarantees stain resistance. Because it is very UV resistant the colours will not change temporarily. This resistant patio deck is extremely suitable for surfaces partially covered by a roof. Choose between warm sand the vibrant shade umbra and modern gravel. Its surface is structured and brushed on one side and therefore looks more natural than its predecessor. Laying it on one side with a small gap width of ca. 5 mm creates an especially uniform and elegant look.
WPC Patio Deck
Resistant pro
Special Features
of Resistant pro
- Waterrepellent
- Resistant to stains
- Particularly low-maintenance
- Very good UV resistance
- One side structured, brushed
Colour Variants
of the WPC patio deck
The new Resistant pro deck is available in sand, umbra and gravel.
Colour and colour maturity in comparison
Thanks to the all-round protective polymer layer and the associated UV resistance, there is no temporary colour development in our RESISTANT pro patio deck.
Technical Data
of the massive deck
Format
width ca. 138 mm, height ca. 23 mm
Surface
one side structured, brushed
Standard lenghts
ca. 4 m / ca. 6 m
Special lenghts
none
Requirements
1 square metre consists of ca. 7 m patio decks
Weight
ca. 3.7 kg/m
Pictures and Videos
Laying
For laying one square metre of Resistant co-ex patio deck you require ca. 7 decks a 1 metre, depending on local conditions ca. 2,5–3 metre base profile and ca. 16 stainless steel brackets with screws (see laying instructions).
- No use of joint profile tube possible
- The use of the corresponding laying aid is mandatory
- Joint dimension is 5 millimetres
- The deck can be used on one side only: Pay attention to the right side up
Made-To-Measure
We produce your individual requests exactly in the right length. This saves you money because you don’t have to cut your length requirements out of the standard lengths. The ordered length has an oversize of +0 to 3 cm due to the production process.
- Less offcuts
- Quicker laying
- Accessories package suitable for construction sites
- At least ten pieces of deck per individual length / colour / model
- Commission reference
On request we will put together the required amount of decks together with the complete accessories.
Complete Set
Use our WPC complete set! We offer you various options for laying, care and lighting for your application. Various substructures, fastenings, supports for height adjustment, decorative connections and borders, as well as ventilation options, offer you great freedom of design.
Care and Cleaning
It’s important for us that you don’t have to invest much time or work concerning our products. That’s why they are particularly easy to care for and weatherproof. In contrast to conventional wooden decks, our decks do not have to be oiled or painted and still do not splinter or crack. Cleaning is very simple using only water. This gives you plenty of time to relax on your favourite spot.