The low maintenance zero-degree deck made of wood composite material is now available in five new shades. In addition to the classic colours brown, grey and anthracite, Natureline’s multicoloured edition’s range is now available, too. As only a low installation height without a slant is required, SMART opens up new application areas for patios and balconies.
‚Smart‘ is especially low on maintenance and is therefore an especially durable patio deck. Its secret is its slightly curved surface which allows water to drain automatically. This means that patios and balconies can be laid without any slant at all – an advantage, especially for renovation work and balconies in older buildings. The wood composite material’s water repellant characteristics support this effect and additionally prevent rain or cleaning water collecting in puddles. Thanks to its stamped surface the zero-degree deck -as all NATURinFORM’s decks – is non-slippery and barefoot friendly. Despite its low weight ‘Smart’ has the advantages of a classic massive deck, thereby ensuring high stability.
Natural colour range with innovative stone stamping
The Natureline edition’s colours oak brown, amber brown, chestnut brown, as well as graphite grey and basalt grey allow ‘Smart’ to create new highlights on patios and balconies. The multicoloured shades and stone-stamped surfaces create a modern and very individual style for each outdoor oasis.
Costsaving and laid in a flash
As there is no need for a slant in the underlying construction, ‘Smart’ has a decisive cost advantage and also opens up completely new application ranges that were not possible until now due to non-existant installation heights preventing laying a new surface. The profiles’ practical ‘click function’ allows simple and quick laying: mount, press, click.
Farewell to moss
The Franconian company NATURinFORM has been known for its high-quality and weather-resistant products made of wood composite material for more than 20 years. The natural material wood is enhanced by adding a technical polymere in such a way to create a water-repellant surface. Water cannot permeate the material and rain drains through the joints. This means that lichen and mosses are not provided with breeding ground, so that NATURinFORM decks are never covered by the typical moss found on natural wood.
Sustainable material, produced CO2 neutrally
NATURinFORM produces sustainable, environmentally-friendly decks and profiles for use outdoors using its tested and certified wood composite material at a ratio of wood to polymer of ca. 70 to 30 percent. They are made using 100 percent PEFC-certified, domestic wood in combination with an environmentally-friendly polymer – now even produced climate-neutrally. Further advantages are resistance to humidity, low maintenance, dimensional stability, robustness, as well as resistance to fungal and insect infestation. Additionally, this material can be recycled 100 percent and can be reused. The company takes back the decks after utilisation if possible and feeds them back into the production process. NATURinFORM surfaces are only manufactured in Upper Franconian Redwitz an der Rodach. ‘Made in Germany‘ stands for certified quality and the use of highest quality raw materials on site in Germany.